Fire Alarm

Smoke Detector

C Mount Camera

 

 

Specification

  • Sleek, low-profile design
  • Analog communications
  • Low standby current
  • Rotary address switches
  • Superior EMI protection
  • Dual LEDs for 360° visibility
  • Fire Alarm Systems - UL, ULC, FM Products

 

 

Manual Call Point

C Mount Camera

 

 

Specification

  • Two types of Manual Call Points (Metal, Plastic).
  • Alarm status is indicated By Red colour LED.
  • Operates on 18-24 VDC.
  • Red, Green, Yellow colour Plastic MCP's
  • 1 No's of CO & NC Output.

 

Sounder

C Mount Camera

 

 

Specification

    • Weatherproof per NEMA 4X, IP56
    • Listed to UL 1638 (strobe) and UL 464 (horn)
    • Compatible with System Sensor synchronization protocol and legacy SpectrAlert products
    • Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
    • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela 

    • Rotary switch for horn tone and three volume selections
    • Horn rated at 88+ dBA at 16 volts
    • Rated from –40°F to 151°F
    • Universal mounting plate with an onboard shorting spring that tests wiring continuity before devices are installed
    • Plug-in design with minimal intrusion into the back box
    • Tamper-resistant construction
    • Listed for ceiling or wall mounting

 

CONTROL PANEL

C Mount Camera

 

 

Specification

    • Fire Alarm Systems - UL, ULC, FM Products
    • Easy mount chassis.
    • 7 amp switching power supply.
    • Large enclosure allows 18 amp-hour batteries
    • DACT-UD2 plug-in communicator standard with MS-9600UDLS/E.
    • Optional IPDACT Internet Protocol Digital Alarm Communicator / Transmitter
    • Four Style Y (Class B) or two Style Z (Class A) NAC circuits.
    • Selectable strobe synchronization per NAC for System Sensor, Wheelock, and Gentex devices.
    • Automated control of ACC-25/50(ZS/T) audio speaker circuits
    • ANN-BUS for connection to following optional modules
      Note: cannot be used if ACS annunciators are used.
    • ANN-80(-W) Remote LCD Annunciator
    • ANN-I/O LED Driver Module
    • ANN-S/PG Serial/Parallel Printer Module
    • ANN-RLY Relay Module
    • ANN-LED Annunciator Module
    • ANN-RLED Annunciator Module (alarms only)